-
4.01 Base Flange
The base flange is designed as a wall fixation flange. Normally used as a wall or base flange, where only positional fixing is required.
Technical Specification
-
4.02 Railing Base Flange
The railing base flange is designed as a strong base flange to support vertical posts. The fixing holes in the base should be set in line with the applied load.
Technical Specification
-
4.03 Horizontal Base Railing Support
The horizontal base railing support is designed so that pipe can be secured parallel to the fixing surface.Typical applications include guard rails, balustrades and flagpoles.
The pipe does not pass completely through the fitting. (If required, the base can be bored out for the pipe to pass through the fitting.)
Technical Specification
-
4.04 Vertical Base Railing Support
The vertical base railing support is designed so that pipe can be secured parallel to the fixing surface.Typical applications include guard rails, balustrades and flagpoles.
The pipe does not pass completely through the fitting. (If required, the base can be bored out for the pipe to pass through the fitting.)
Technical Specification
-
4.05 Railing Base Flange 0° to 11°
The railing base flange 0o—11o is designed as a strong base flange to support vertical posts on sloping ground.The fixing holes in the base should be set in line with the applied load.
Often used together with MasterKlamp product types 1.03, 1.06, 2.11, 3.02.
Technical Specification
-
4.06 Handrail Support
The handrail support is designed to carry handrails alongside walls. As an alternative it can also be used to attach pipe to floors, walls or ceilings.
Technical Specification
-
4.08 Railing Base Flange with Toeboard Support
The railing base flange with toeboard support is designed as a strong base flange to support vertical posts.The toeboard support allows for the fixation of a toeboard along the ground level.
Technical Specification
-
4.10 Base Plate (uni)
The base plate is designed as a brace fitting for attachments to walls, floors and ceilings. Normally used together with Masterklamp product type 5.09.
Technical Specification
-
4.11 Swivel Base
The swivel base is designed as a variable angle brace fitting for attachments to walls, floors and ceilings.
Technical Specification
-
4.13 Side Palm
The side palm is designed for fixing pipe close to the wall, such as balustrades and guard rails.The pipe does not pass completely through the fitting. (If required, the base can be bored out for the pipe to pass through the fitting.)
Technical Specification
-
4.18 Ground Socket
The ground socket is designed to be anchored into concrete. Normally used where the upright is removable.A set screw is incorporated at an angle to allow for easy tightening of the upright.
Technical Specification
-
4.20 Single Sided Collar Plate
The single sided collar plate is designed to be used as a panel or post fixing bracket with 1 attachment hole.
Technical Specification
-
4.21 Double Sided Collar Plate
The double sided collar plate is designed to be used as a panel or post fixing bracket with 2 attachment holes.
Technical Specification
