-
6.01 Straight Coupling
The straight coupling is designed as an external, in-line joint between two pipes of the same diameter.
Technical Specification
-
6.03 Internal Coupling
The internal coupling is designed to join two lengths of equal diameter pipe.The internally fitting, streamlined joint operates best when the pipes wall thickness is approximately 3.2 mm.
Technical Specification
-
6.04 Hook
The hook is designed to attach to a vertical post allowing a chain to be attached to it.Typically used to either hold gates (chain or framed gates) in a closed or open position.
Technical Specification
-
6.06 Collar
The collar is designed to provide additional support to existing Masterklamp products .Normally used when the loading on a structure exceeds the maximum permitted slip load of a set screw, as it gives extra support.
Technical Specification
-
6.08 Female Gate Hinge
The female gate hinge is designed to compliment the male gate hinge, type 6.09.
Technical Specification
-
6.09 Male Gate Hinge
The male gate hinge is suited to vertical adjustment by loosening the set screw that fixes the hinge to the post.Normally used together with Masterklamp product type 6.08.
Technical Specification
-
6.14 Single Sided Panel Clip
The single sided panel clip is designed to attach wire mesh infills. All clips are supplied with hexagonal bolt and nut M6 x 35.
Technical Specification
-
6.20 Set Screw
Spare set screws come in three sizes:Small: 3/8” BSF To suite 21 OD fittings
Medium: 1/4” BSP To suite 27 & 34 OD fittings
Large: 3/8” BSP To suite 42, 48 & 60 OD fittings
Technical Specification
-
6.21 Allen Key
Allen Keys are available in three sizes:Small: 3/16 across flats To suite small set screws
Medium: 1/4 across flats To suite medium set screws
Large: 5/16 across flats To suite large set screws
Technical Specification
